Introduction
This Owner’s Manual is made for several different bicycles. Some of the illustrations may not look exactly like the parts of the bicycle, but the instructions are correct. If the bicycle has any parts that are not described in this manual, look for separate “Special Instructions” that are supplied with the bicycle. Make sure the rear wheel is centered in the bicycle frame.
Do not dispose of the carton and packaging until you complete the assembly of the bicycle. This can prevent accidentally discarding parts of the bicycle.
NOTE: All of the directions (right, left, front, rear, etc.) in this manual are as seen by the rider while seated on the bicycle.
Attach and use only HBC brand accessories and replacement parts on the bicycle.
Tools Needed
Small Adjustable Wrench | Large Adjustable Wrench |
(Jaws must open at least 9/16 inch.) | (Jaws must open at least 1 1/4 inch.) |
Phillips Screwdriver |
Metric Allen Wrenches | |
| (Needed on some models.) |