JVC RX-7001PGD manual Activating the DSP Modes, Select and play a sound source

Page 30
DOLBY SURROUND

English

5.

Press TEST again to stop the test tone.

TEST

4

 

 

6.

Press EFFECT to select an effect

EFFECT

 

level you want.

7/P

•Each time you press the button, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

Activating the DSP Modes

You can use only one DSP mode at a time. When a DSP mode is activated, another DSP mode is canceled if in use.

For Dolby Pro Logic, Dolby Digital, DTS Digital Surround and MPEG Multichannel

1.Press SURROUND ON/OFF so that the lamp on the front panel button lights up.

•Each time you press the button, the Dolby/DTS/MPEG Surround turns on and off alternately.

SURROUND ON/OFF

 

SURROUND

 

ON/OFF

On the front panel

On the remote control

1.Press DSP MODE repeatedly until “THEATER” appears on the

display.

The Ù PRO LOGIC and DSP indicators also light up on the display.

2.Adjust the speaker output levels.

1)Press (BALANCE/) SURROUND ADJUST repeatedly until one of the indications appears on the display. “CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

2)Turn MULTI JOG to adjust the selected speaker output level (from –10 dB to +10 dB).

3)Repeat 1) and 2) to adjust the other speaker output levels.

DSP MODE

BALANCE/SURROUND

ADJUST

MULTI JOG

2. Select and play a sound source.

• To enjoy Dolby Pro Logic, play back a software encoded with

Dolby Surround and labeled with mark.

•To enjoy Dolby Digital, play back a software encoded with Dolby Digital and labeled with D I G I T A L mark.

•To enjoy DTS Digital Surround, play back a software encoded

with DTS Digital Surround and labeled with mark.

•To enjoy MPEG Multichannel, play back a software encoded

with MPEG Multichannel and labeled with mark.

To cancel the Dolby/DTS/MPEG Surround mode

Press SURROUND ON/OFF again so that the lamp on the front panel button goes off. (“SURROUND OFF” appears on the display.)

SURROUND ON/OFF

SURROUND

ON/OFF

3.Adjust the effect level.

1)Press (BALANCE/) SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display. The display changes to show the current setting.

2)Turn MULTI JOG to select the effect level.

As you turn it, the effect level changes as follows:

BALANCE/SURROUND

ADJUST

MULTI JOG

On the front panel

On the remote control

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5

DSP EFFECT 4

As the number increases, JVC Theater Surround becomes stronger.

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents RX-7001PGD Precaución English Español Português Table of Contents Remote Control Front Panel Parts IdentificationConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Setting the Voltage Selector SwitchConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceTo audio input Cassette deck To audio output CD playerVideo component connections MD recorder To audio outputTo composite video input To S-video input When you connect the DVD player with stereo output jacksDVD player DBS tunerDBS tuner DVD player Digital connectionsMD recorder, etc CD player MD recorderPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FBasic Operations Turning the Power On and Off StandbyFrom the remote control Selecting the Source to PlayEtc Adjusting the VolumeSelecting the Front Speakers Turn Source Selector toMuting the Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassRecording a Source Basic SettingsAdjusting the Front Speaker Output Balance Changing the Source NamePress Setting repeatedly until Setting the Subwoofer InformationSetting the Speakers for the DSP Modes Rear Delay appears on DisplayCrossover FRQ Crossover Frequency appears on the display Delay time of the rear speaker OutputTurn Multi JOG to select LFE ATT Low Frequency Effect Attenuator appears on DisplayDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeSetting the AM Tuner Interval Spacing Using the Sleep TimerShowing the Text Information on Display Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Assigning Names to Preset Stations Selecting the FM Reception ModePress SEA Adjust repeatedly Using the SEA ModesSelecting Your Favorite SEA Mode Creating Your Own SEA Mode SEA level of the selected frequency RangeUsing the DSP Modes 3D-PHONIC modesDAP modes DVD Multi Playback Mode Surround modesAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes JVC Theater Surround adjustments Ù PRO Logic and DSP indicators also light up on the displayRepeatedly until Theater Select and play a sound source To cancel the Dolby/DTS/MPEG Surround modeActivating the DSP Modes To enjoy Dolby Pro Logic, play back a software encoded withWant appears on the display Repeatedly until the DSP mode youTo cancel the DSP mode For the other DSP modesDVD Multi appears on Display Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Press DVD Multi so that DVDPress Menu Using the On-Screen MenusWhen you finish, press Exit Press %/ Þto move to VisualPress %/ Þto move to Sound CONTROL, then press @/ # @/ #Creating Your Own SEA Mode Adjusting the DVD Multi Playback ModeSelecting Your Favorite SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press %/ Þto move To SETTING, then press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Setting the Basic Setting Items Also seeStoring the Preset Stations Also see Assigning Names to Preset StationsPress %/ Þ / @/ #to Move in front of a character you want Same time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionDisc Search Only for CD Player Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Title InputTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Disc Information screen appears on the TVPress %/ Þto move to Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move to SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to the genre you want, then press SET Press Text Display while MD is selected as the sourceEnter the disc title Referring to steps 3 Press %/ Þto move to Title Input Then press SETOn the TV is RECEIVER/AMP AV Compu Link Remote Control SystemIf the AV Compu Link terminal Case 4 If only the DVD player is equipped with the SOne-Touch Video Play Automatic Selection of TV’s Input ModeAutomatic Power On/Off One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD player-changer7/P Cassette deckOperating Video Components DVD player0, 100+ Release TV/CATV/DBS If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressing TV/CATV DBSTry to operate your VCR by pressing VCR If there are more than one code listed for your brandRelease VCR 10, 0, 100+ +10Manufacturers’ codes for TV Manufacturers’ codes for Catv converters Manufacturers’ codes for DBS tuner SEI Troubleshooting Problem Possible Cause SolutionAudio SpecificationsAmplifier VideoAM tuner Tuning Range Usable Sensitivity Signal-to-Noise RatioFM tuner IHF GeneralPrecaución para la línea de la red CA Precaução para a ligação à tensão da rede CA

RX-7001PGD specifications

The JVC RX-7001PGD is an outstanding audio receiver that combines exceptional performance with a range of modern features, making it an ideal choice for home theater enthusiasts and music lovers alike. Designed to deliver rich, immersive sound, this receiver is packed with vital technologies that enhance audio fidelity while providing convenience and connectivity options.

One of the standout features of the RX-7001PGD is its robust power output, capable of driving multiple speakers with high clarity and minimal distortion. With multiple channels, it supports surround sound formats, making it perfect for creating an exhilarating home theater experience. Whether you're watching movies or listening to music, this receiver ensures that every note and dialogue is heard with precision and depth.

The device supports various audio formats, allowing users to enjoy their media in the best quality available. From standard stereo to more complex multichannel audio formats, the JVC RX-7001PGD handles it all, providing users with the flexibility to enjoy their favorite content as intended by the creators. Additionally, the receiver features built-in digital signal processing, which helps optimize audio playback for different environments, ensuring a balanced listening experience regardless of the room's acoustics.

In terms of connectivity, the RX-7001PGD excels with multiple input options including HDMI, optical, and analog connections, allowing seamless integration with a variety of devices such as televisions, gaming consoles, and Blu-ray players. With USB support, users can easily connect their music libraries directly to the receiver, making it easier than ever to enjoy playlists without the need for additional equipment.

The receiver also includes Bluetooth technology, enabling wireless streamlining from smartphones and tablets, so users can enjoy their favorite tracks without the hassle of cables. This feature enhances the receiver's versatility, making it not only a powerful audio component but also a hub for a modern multimedia setup.

Furthermore, the JVC RX-7001PGD has an intuitive user interface, making setup and operation straightforward even for those who are not tech-savvy. The included remote control is comprehensive, providing easy navigation between settings and sources.

Overall, the JVC RX-7001PGD offers an impressive combination of power, versatility, and modern technology, making it a compelling choice for anyone looking to build or upgrade their home audio system. With its engaging sound quality and user-friendly design, this receiver stands out in the crowded marketplace of home theater receivers.
Top Page Image Contents