JVC RX-7001PGD FM tuner IHF, AM tuner, Tuning Range Usable Sensitivity Signal-to-Noise Ratio

Page 57

FM tuner (IHF)

Tuning Range:

Usable Sensitivity:

50 dB Quieting Sensitivity:

Signal-to-Noise Ratio (IHF-A weighted):

Total Harmonic Distortion:

Stereo Separation at REC OUT:

Alternate Channel Selectivity:

Frequency Response:

AM tuner

Tuning Range:

Usable Sensitivity:

Signal-to-Noise Ratio

General

Power Requirements:

Power Consumption:

Dimensions (W x H x D):

Mass:

87.50 MHz to 108.00 MHz

 

Monaural:

12.8 dBf (1.2 µV/75

Ω)

Monaural:

21.3 dBf (3.2 µV/75

Ω)

Stereo:

41.3 dBf (31.5 µV/75

Ω)

Monaural:

78 dB at 85 dBf

 

Stereo:

73 dB at 85 dBf

 

Monaural:

0.4% at 1 kHz

 

Stereo:

0.6% at 1 kHz

 

35 dB at 1 kHz

45 dB: (±400 kHz)

30 Hz to 15 kHz: (+0.5 dB, –3 dB)

531 kHz to 1 602 kHz (at 9 kHz intervals) 530 kHz to 1 600 kHz (at 10 kHz intervals)

Loop antenna

400 µV/m

 

50 dB (100 mV/m)

AC 110 V/127 V/220 V/230 V – 240 V , adjustable with the voltage selector, 50 Hz/60 Hz

200 W(at operation)

5 W (in standby mode)

435 mm x 157 mm x 412.5 mm

11. 3kg

Designs & specifications are subject to change without notice.

English

54

Image 57
Contents RX-7001PGD Precaución English Español Português Table of Contents Parts Identification Remote Control Front PanelChecking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Setting the Voltage Selector SwitchBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM Antenna ConnectionsConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker About the speaker impedanceVideo component connections CD playerTo audio input Cassette deck To audio output MD recorder To audio outputDVD player When you connect the DVD player with stereo output jacksTo composite video input To S-video input DBS tunerMD recorder, etc Digital connectionsDBS tuner DVD player CD player MD recorderPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet R6PSUM-3/AA15FFrom the remote control Turning the Power On and Off StandbyBasic Operations Selecting the Source to PlaySelecting the Front Speakers Adjusting the VolumeEtc Turn Source Selector toAdjusting the Subwoofer Output Level Attenuating the Input SignalMuting the Sound Reinforcing the BassAdjusting the Front Speaker Output Balance Basic SettingsRecording a Source Changing the Source NameSetting the Speakers for the DSP Modes Setting the Subwoofer InformationPress Setting repeatedly until Rear Delay appears on DisplayTurn Multi JOG to select Delay time of the rear speaker OutputCrossover FRQ Crossover Frequency appears on the display LFE ATT Low Frequency Effect Attenuator appears on DisplaySelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingSetting the AM Tuner Interval Spacing Using the Sleep TimerShowing the Text Information on Display Tuning in Stations Manually Using Preset TuningReceiving Radio Broadcasts Selecting the FM Reception Mode Assigning Names to Preset StationsSelecting Your Favorite SEA Mode Creating Your Own SEA Mode Using the SEA ModesPress SEA Adjust repeatedly SEA level of the selected frequency RangeUsing the DSP Modes 3D-PHONIC modesDAP modes Surround modes DVD Multi Playback ModeFront Available DSP Modes According to the Speaker ArrangementAdjusting the DAP Modes Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes JVC Theater Surround adjustments Ù PRO Logic and DSP indicators also light up on the displayRepeatedly until Theater Activating the DSP Modes To cancel the Dolby/DTS/MPEG Surround modeSelect and play a sound source To enjoy Dolby Pro Logic, play back a software encoded withTo cancel the DSP mode Repeatedly until the DSP mode youWant appears on the display For the other DSP modesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeDVD Multi appears on Display Press DVD Multi so that DVDWhen you finish, press Exit Using the On-Screen MenusPress Menu Press %/ Þto move to Visual@/ # Press %/ Þto move to Sound CONTROL, then press @/ #Selecting Your Favorite SEA Mode Adjusting the DVD Multi Playback ModeCreating Your Own SEA Mode Press %/ Þto move to Surround LEVEL, then press @/ #Press SET to store the setting into the SEA Usermode Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress %/ Þto move To SETTING, then press @/ # Setting the Basic Setting Items Also seeStoring the Preset Stations Also see Assigning Names to Preset StationsPress %/ Þ / @/ #to Move in front of a character you want Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Disc Title InputShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Disc Information screen appears on the TVPress %/ Þto move to SEARCH, then Press SET Press Text Display while CD is selected as the sourcePress %/ Þto move to Performer Then press SET Press SET againPress %/ Þto move To GENRE, then Press SET Press %/ Þto move to Search Then press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationEnter the disc title Referring to steps 3 Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET Press %/ Þto move to Title Input Then press SETIf the AV Compu Link terminal AV Compu Link Remote Control SystemOn the TV is RECEIVER/AMP Case 4 If only the DVD player is equipped with the SAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section Amplifier7/P CD player-changerTurntable Cassette deckOperating Video Components DVD player0, 100+ Operating Other Manufacturers’ Video Equipment If there are more than one code listed for your brand of TVRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSRelease VCR If there are more than one code listed for your brandTry to operate your VCR by pressing VCR 10, 0, 100+ +10Manufacturers’ codes for TV Manufacturers’ codes for Catv converters Manufacturers’ codes for DBS tuner SEI Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsAudio VideoFM tuner IHF Tuning Range Usable Sensitivity Signal-to-Noise RatioAM tuner GeneralPrecaução para a ligação à tensão da rede CA Precaución para la línea de la red CA

RX-7001PGD specifications

The JVC RX-7001PGD is an outstanding audio receiver that combines exceptional performance with a range of modern features, making it an ideal choice for home theater enthusiasts and music lovers alike. Designed to deliver rich, immersive sound, this receiver is packed with vital technologies that enhance audio fidelity while providing convenience and connectivity options.

One of the standout features of the RX-7001PGD is its robust power output, capable of driving multiple speakers with high clarity and minimal distortion. With multiple channels, it supports surround sound formats, making it perfect for creating an exhilarating home theater experience. Whether you're watching movies or listening to music, this receiver ensures that every note and dialogue is heard with precision and depth.

The device supports various audio formats, allowing users to enjoy their media in the best quality available. From standard stereo to more complex multichannel audio formats, the JVC RX-7001PGD handles it all, providing users with the flexibility to enjoy their favorite content as intended by the creators. Additionally, the receiver features built-in digital signal processing, which helps optimize audio playback for different environments, ensuring a balanced listening experience regardless of the room's acoustics.

In terms of connectivity, the RX-7001PGD excels with multiple input options including HDMI, optical, and analog connections, allowing seamless integration with a variety of devices such as televisions, gaming consoles, and Blu-ray players. With USB support, users can easily connect their music libraries directly to the receiver, making it easier than ever to enjoy playlists without the need for additional equipment.

The receiver also includes Bluetooth technology, enabling wireless streamlining from smartphones and tablets, so users can enjoy their favorite tracks without the hassle of cables. This feature enhances the receiver's versatility, making it not only a powerful audio component but also a hub for a modern multimedia setup.

Furthermore, the JVC RX-7001PGD has an intuitive user interface, making setup and operation straightforward even for those who are not tech-savvy. The included remote control is comprehensive, providing easy navigation between settings and sources.

Overall, the JVC RX-7001PGD offers an impressive combination of power, versatility, and modern technology, making it a compelling choice for anyone looking to build or upgrade their home audio system. With its engaging sound quality and user-friendly design, this receiver stands out in the crowded marketplace of home theater receivers.