Assembly
PUSHKey
Seat 
Frame
1
•Fit the seat onto the frame.
•Push firmly near the back end of the seat to "snap" it into place.
•Insert and "snap" the key into the frame.
Hint: You may need to tap the key with a hammer to secure it in place.
Bushing
(Grooved Side Down)
Rear
Wheel
(Indented Side Down)
Wheel Hub
(Flat Side Down)
Straight | Straight |
Axle | Axle |
| Cap Nut |
2
Straight Axle Assembly
3
Bottom View
•Turn the frame upside down.
•Insert the straight axle assembly through the holes in the rear of the frame.
Wheel
(Flat Side First)
| Straight Axle |
| Bushing |
| (Smooth Side First) |
4 | Wheel Hub |
(Pointed End First) |
•Turn the assembly upright.
•Slide a bushing, smooth side first, onto the end of the straight axle.
•Slide a wheel, flat side first, onto the end of the straight axle.
•Slide a wheel hub, pointed end first, onto the end of the straight axle.
•Place one end of the straight axle into the cap nut. Tap the end of the straight axle with a hammer.
Make sure the cap nut is securely attached to the straight axle.
•Slide a wheel hub, flat side down, onto the straight axle.
•Slide a rear wheel, indented side down, onto the straight axle.
•Slide a bushing, grooved side down, onto the
straight axle. | 3 |