Assembly
5
•Fit the cap nut on the end of the straight axle.
•Tap the cap nut with a hammer. Gently pull the rear wheel to be sure the cap nut is securely attached to the straight axle.
Hint: You may need the help of another adult to hold the other end of the straight axle in place.
Pedal Hub
Pedal Axle Tab
Pedal Hub | Pedal Axle Tab |
|
7
•Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub.
Front Wheel Hole
8
• While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
•Press the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.
Wheel Hub
6 | Wheel Cap |
|
•Fit the tabs on the wheel cap into the slots in the wheel hub. Push to "snap" the wheel cap in place.
•Repeat this procedure to attach the other wheel cap to the other wheel hub.
9
•Turn the front wheel assembly over.
•Insert the remaining pedal
hubs on top of and below the pedal axle and into the hole in the center of the front wheel.
•Press the pedal hubs until they are flush with the surface of the front wheel.
PRINTED IN MEXICO | 4 |
|
|