Pole bracket will need to be lightly pressed into backboard ribbing. Be sure to press
7. completely into place. Attach rim to backboard and pole bracket (20) with knob (17), reinforcement bracket (24), and carriage bolt (16) as shown. Tighten knob completely.
NOTE: |
BOARD STYLE |
MAY VARY |
WARNING!
KNOB MUST BE TIGHTENED COMPLETELY AND CHECKED FOR TIGHTNESS BEFORE EACH USE.
24
17
PRESS BRACKET (20)
INTO PLACE HERE 
16
20
Carefully tip unit forward and slide backboard assembly onto pole as shown.
SAWHORSE OR SUPPORT TABLE
P/N 21463403 10/11/04 | 12 |
http://www.huffysports.com