3. Bounce top and middle pole assembly (4 and 5) onto bottom pole section (6) using a wood scrap as shown. Bounce until the top and middle pole assembly no longer moves toward the pole identification mark on the bottom pole.
IMPORTANT!
Align dimple of middle pole section (5) into trough of bottom pole section (6) as shown.
Dimple |
Trough |
1.5” (3.81 cm) |
Bottom pole |
5” |
(12.7 cm) |
ID Sticker |
NOTE:
POLE SECTIONS SHOULD HAVE A 3-1/2" (9 CM) MINIMUM OVERLAP.
4
5
Bottom pole
6
Wood Scrap (NOT SUPPLIED)
ID# M730131 | 11/05 | 10 |