Huffy M730131 manual Before YOU Start

Page 4

BEFORE YOU START!

To ensure optimal playability of backboard system, a close tolerance fit between the elevator

components and hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates. Carefully rock them in a circular motion to ream out any excess paint from holes if necessary.

Not all items pictured are included with every model.

WARNING: IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC

BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE THAT MAY HAVE

OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD

RESULT IN SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY

WAY PRIOR TO OR AFTER ASSEMBLY, CALL TOLL-FREE NUMBER:

U.S. 1-800-558-5234; CANADA: 1-800-284-8339; http://www.huffysports.com

WARRANTY CARD:

Please remember to complete your product registration form either on-line at: www.huffysports.com/customer_support/product_registration or mail-in the enclosed postcard.

ID# M730131

11/05

4

Image 4
Contents Portable Basketball System Safety Instructions Height Adjustment Before YOU Start Get to know the basic parts of your basketball system Hardware Identifier Bolts and Screws Hardware Identifier Nuts and Washers Section a Assemble the Base Align dimple of top pole into trough of middle pole as shown Pole Sections should have a 3-1/2 9 CM Minimum Overlap Do not Over Tighten Tighten Bolt 11 in Lock 16 1/2 9/16 3/4 Elevator Tubes USE EYE Protection ID# M730131 11/05 11/05 ID# M730131 If Using Sand Do not Allow