4. Install rod (7) through holes in bottom pole section (6) and eyebolt (8).
8
6
7
5. Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with spacers
(17)as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown. A deep socket is recommended.
WARNING!
TWO PEOPLE REQUIRED FOR THIS
PROCEDURE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS
INJURY AND/OR PROPERTY DAMAGE.
6 |
IMPORTANT! | 1 |
DO NOT OVER |
|
TIGHTEN | 7 |
| |
| 8 |
IMPORTANT!
THE SPACER (17) WILL FIT LOOSELY UNTIL SECURED INTO THE CAVITY OF THE BASE.
17 | 2 | 19 |
| ||
|
|
3 |
9 |
3 | 17 |
11 | 11/05 | ID# M730131 |