HEIGHT ADJUSTMENT
1. Rest unit on support table. Remove adjustment knob (9), carriage bolt (7), and washer (8) to extend or retract pole. Pole adjusts from 71/2’ to 10’.
WARNING
BACKBOARD AND TOP POLE MAY ROTATE DURING HEIGHT ADJUSTMENT.
9
8 
7
SUPPORT TABLE
TO PLACE IN THE STORAGE POSITION
1. Lower backboard and rim down to the lowest position (71/2’ (2.29 m)).
2. Remove adjustment knob (9), washer (8), and carriage bolt (7). Carefully rotate pole downward towards ground.
WARNING
DO NOT STAND BEHIND
SYSTEM WHEN PREPARING
FOR STORAGE.
3. | Secure pole assembly to tank (1) with carriage | |
| bolt (7), washer (8), and adjustment knob (9). | |
| Remove adjustment knob (24) from swivel | |
| bracket (21) and carefully rotate backboard | |
| assembly 180º. |
|
| PLAY |
|
| POSITION |
|
24 |
|
|
| 8 |
|
|
| 8 |
|
| 9 |
STORAGE | 4. Secure backboard assembly in storage position | |
POSITION | ||
|
| with adjustment knob set (24 and 8) as shown. |
7
1
P/N 211387 | 5/99 | 10 | printed on recycled paper |
|