IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL
1. Remove contents from tank (1).
2. Turn tank (1) bottom side up. Insert axle rod (2) through wheel (3), as shown. Secure wheel assembly
to tank by tapping wheel assembly downward with hammer. It will snap into position. Repeat for opposite side, then carefully turn tank over.
3. Correctly identify each pole section and mark indicated distance from end of bottom pole section (4) with tape as shown.
5 
TOP
| 2 |
|
|
| 1 |
| 3 |
|
6 |
| 4 |
|
| |
MIDDLE | 5” | BOTTOM |
|
| |
| (13 cm) |
|
4. Slide top of upper pole section (5) through bottom of middle pole section (6). Secure top and middle pole sections together in both locations as shown, using carriage bolts (7), washers (8), adjustment knob (9), and flange nut (13).
IMPORTANT! This step MUST be completed before going on to step 5.
6
“Bottom of middle
pole section”
“Top of upper pole section”
5
5 | 6 |
9 
8
5 
NOTE: Top pole section will slide |
|
through middle pole section. | 7 |
7
6
8
13
| printed on recycled paper | 3 | 5/99 | P/N 211387 |
| ||||
|
|
|
|
|