| 10. Rest pole assembly on FILLED tank. | |
| WARNING | |
| KEEP UNNECESSARY | |
| PRESSURE OFF OF THE | |
| POLE ASSEMBLY WHEN IN | |
| THIS POSITION. TWO | |
| PEOPLE RECOMMENDED | |
| FOR THIS STEP. | |
| 13 | |
11. Attach pole assembly to pole bracket (10) as | 8 | |
shown. NOTE: Keep unnecessary pressure off | ||
19 | ||
of the pole assembly when in this position. Two |
| |
people recommended for this step. |
|
| 10 |
| 8 |
21 | 12. Attach upper pole mounting bracket (20) to swivel |
| |
| bracket (21) and fully tighten. |
| 22 |
20 | 23 |
| 13 |
| 12 |
12 |
|
|
| 13. Attach lower halves of backboard |
|
|
| brackets (23) to swivel bracket (21). | 21 |
|
| NOTE: Keep hardware loose until | |
|
| after alignment in step 16. | 12 |
|
|
| |
|
|
| 13 |
P/N 211387 | 5/99 | 6 | printed on recycled paper |
|