Assembly

Thank you for purchasing the Strength Trainer International Bench! The quality product you have chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the Owner’s Manual and become familiar with the operation of your new unit.

Remember to take the time to perform stretching exercises, provided in this manual, to help avoid injury.

Getting Started - The Strength Trainer International Bench will require some assembly. Unpack the box in a clear area. Remove packing material. Do not dispose of packing mate- rial until assembly is complete and unit is working properly. Place the unit on a clean level surface for assembly. Before assembling, the unit should be placed as close as possible to its final location. If you are missing any parts or hardware, please call Keys Fitness at 1-888-340- 0482. Tools have been provided to assist with product assembly. Keys Fitness recommends for two people to assemble the unit. As you assemble the bench, make sure all parts are oriented as shown in the drawings.

The included hex key, grease packet, and the following tools (not included) are recommended for assembly.

Hex Key (Included)

Two Adjustable Wrenches

Rubber Mallet

Weight Rest

Flat Head Screwdriver

Phillips Head Screwdriver

Adjustable Tube

Safety Spotter

Arm Curl Pad

	Leg Extension	Weight Plate Holder
	w/ Curl Bar	Weight Plate Holder
	w/ Curl Bar

Olympic Adapter