Keys Fitness ST-IB owner manual Hexagonal Holes

Page 8

Assembly

Step 4

Attach the front leg (12) to the front stabilizer (11) with two M10X95mm bolts (64) and two M10 nylon locknuts (58).

Figure 4

Step 5

Position the frame (8) so that the hexagonal holes are on the bottom. Attach the frame (8) to the crossbar (5) using three M10X70mm bolts (33), two M10 washers (43), and three M10 nylon locknuts (58).

Figure 5		43	58
		3 3	43
			43
	33
		5
		58
	8	33
	8
Hexagonal
Holes

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.

Image 8

Contents Customer Service 888 Model Name ST-IB Date of Purchase Serial NumberTable of Contents Important Safety Information Safety TipsAssembly Hardware Identifier Step Assembly Hexagonal Holes Pin Assembly Grease Grease Bracket Locking Bar4 Assembly Congratulations Adjustments Seat AdjustmentsOlympic Plate Adapter AttachmentsCurl Bar Attachment Weight Rests and Safety Spotters Arm Curl PostWarm Up Exercises Warm Up Exercises Warm Up Exercises Parts List ST-IB Parts List REV. aExploded View 4950 Warranty Information Residential and Personal Use Limited WarrantyPage Page Customer Service