Keys Fitness ST-IB owner manual Pin

Assembly

Step 6

Tighten the "T"-handle (45) into the seat carriage (42). Pull the "T"-handle (45) out as far as it will go and slide the seat carriage (42) onto the frame (8).

Attach the front leg (12) to the frame (8) using two M8X60mm bolts (59), two M8X65mm bolts (46), six M8 washers (50), and four M8 nylon locknuts (49).

Figure 6		59
49	50
45		50
			8
12			50
	42	50	46
		49

Step 7

Set the pins on the adjustment tube (9) into a set of brackets located on the left and right uprights (3 & 4).

Figure 7

Pin

4

9

Pin

3

NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.