36Chapter 4 Installing the server and peripheral devices
Figure 10
Dongle without feature key
a.To open the dongle to insert the software feature key, gently push back the clip on side of the dongle using a very small screwdriver and pull back on the access door.
b.Insert the software feature key with the data contact facing down and away from the embossed i. (For more information about installing the software feature key, see Figure 11 "Installing the software feature key" (page 36).
Figure 11
Installing the software feature key
3Remove the front protection cover from the dongle.
Nortel CallPilot
600r Server Hardware Installation
5.014 May 2008
Copyright ©