Nortel Networks manual Unpacking the 600r server, To unpack the equipment, What is next?

Unpacking the 600r server 23

Unpacking the 600r server

Introduction

Follow this procedure to unpack the server and peripherals.

WARNING

Risk of personal injury

The 600r CallPilot server weighs approximately 10 kg (23 lbs) as shipped from manufacturing. If necessary, and to prevent personal injury, ask someone to help you unpack and position the server.

To unpack the equipment

ATTENTION

As you unpack each item, check it off against the packing list, as well as against the following checklists provided in the Installation and Configuration Task List (NN44200-306):

•CallPilot software media and documentation checklist

•CallPilot server hardware checklist

Step Action

1Carefully open the cardboard carton containing the server.

2Remove the server from the carton and place on a secure surface.

3Carefully open the cartons containing the monitor, keyboard, mouse, modem, and ELAN Ethernet switch or hub (if supplied), and set the peripherals aside.

4Put all manuals, DVD/CD/CDRWs, operating system disks, and any disks for peripherals in a safe place.

5Save all packing materials and cartons in case you must return any equipment to the carrier.

—End—

What is next?

Remove the top cover to inspect the interior of the server. For information about how to inspect the interior of the server, see "Inspecting the interior of server" (page 24).

Nortel CallPilot

600r Server Hardware Installation

NN44200-307 01.03 Standard

5.014 May 2008

Copyright © 2007-2008, Nortel Networks