Nortel Networks 600r manual Chapter Installing the server and peripheral devices

27

Chapter 4

Installing the server and peripheral devices

In this chapter

"Installing the server" (page 27)

"Connecting peripherals to the server" (page 28)

"Connecting the server to the ELAN subnet" (page 32)

"Connecting the server to the Nortel server subnet (optional)" (page 33)

"Installing the Nortel software feature dongle" (page 34)

Installing the server

Before you install the 600r server, ensure that the chosen location meets the requirements identified in the Site inspection checklist provided in the Installation and Configuration Task List (NN44200-306).

Note: The 600r server is supplied with industry standard 48.3 cm (19 in.) rack rails that can accommodate racks with a maximum depth of 61 cm (24 in.) between the mounting posts. Check the rack you are using and ensure that the Nortel supplied server rack rails are suitable for your specific installation requirements. For depths greater than 61 cm (24 in.), Nortel recommends that you purchase a third-party rack shelf that can safely hold up to 23 kg (50 lb.)

Nortel CallPilot

600r Server Hardware Installation

NN44200-307 01.03 Standard

5.014 May 2008

Copyright © 2007-2008, Nortel Networks