HOW to USE the Information Mode

The console features an information mode that allows you to view treadmill usage information, select a sys- tem of measurement for the console, and turn on and turn off the demo mode. The information mode also al- lows you to adjust the settings of the television and to save channels into the televisionʼs memory.

Follow the steps below to use the information mode.

1.Press the Rate/Wt. decrease button while in- serting the key into the console.

When the information mode is selected, the lower part of the screen will show the total number of miles or kilometers that the walking belt has moved (Distance) and the total number of hours that the treadmill has been used (Time).

In addition, the center of the display will show the word “English” for English miles or “Metric” for metric kilometers. Press the Speed increase but- ton to change the unit of measurement if desired. IMPORTANT: If the words “Demo On” appear in the center of the display, the “demo” mode is se- lected. This mode is intended to be used only when a treadmill is displayed in a store. When the demo mode is selected, the power cord can be plugged in, the key can be removed from the con- sole, and the displays on the console will automat- ically light in a preset sequence. The buttons on the console will not function. If the words “Demo

On” appear on the screen when the informa- tion mode is selected, press the Speed de- crease button so the words “Demo Off” ap- pear.

While the information mode is selected, you can select an equalizer setting to optimize the sound of your personal music if desired. To select an equalizer setting, first press the Start/Stop button. Next, press the Speed increase and decrease but- tons to choose among Default, Classic, Country, Techno, or Rock. When you have selected a set- ting, remove the key from the console. Then, press the Rate/Wt. decrease button while reinsert- ing the key into the console.

2.Press the TV button and adjust the brightness, contrast, color, sharpness, and/or hue of the television.

When the TV button is pressed, the brightness level indicator will appear on the television screen. Press the Volume (VOL) buttons to adjust the brightness setting if desired.

Next, press the Channel (CHAN) buttons until the contrast, color, sharpness, or hue level indicator appears. Adjust the settings, if desired, by press- ing the Volume buttons.

3.Press the TV button again and add or delete cable channels.

Note: Complete this step only if you are using analog cable. After all valid cable channels avail- able in your area have been saved into the televi- sionʼs memory (see step 5 on this page), you can manually add channels or delete unwanted chan- nels.

To add or delete a cable channel, first press the Channel buttons until the desired channel number appears on the screen. Then, press the Volume increase button to add the channel, or the Volume decrease button to delete the channel. Continue this process until you have added all desired channels and deleted all unwanted channels.

4.Press the TV button again and select a cable connection.

If you have connected a CATV cable, one of the three Cable settings should be selected; try all three Cable settings, if necessary, to find the opti- mal setting. Press the Volume increase button to select the Standard Cable setting, the Channel decrease button to select the Cable IRC setting, or the Channel increase button to select the Cable HRC setting.

5.Press the TV button again and save cable channels into the televisionʼs memory.

When the TV button is pressed, the television will begin scanning all of the cable channels available in your area. When no cable signal is detected on a channel, the channel will be skipped. When a cable signal is detected, the channel will be saved into memory and the next channel will be se- lected. This process will continue until the highest channel is reached. Do not remove the key while the television is scanning channels. Note: If you are viewing channels through an ex- ternal source such as a cable box or a VCR, the television will save only the channel used by the external source.

6.When you are finished using the information mode, remove the key from the console.

To exit the information mode at any time (except while the television is scanning channels), remove the key from the console.