Weider 160xtb user manual Troubleshooting, Problem The power turns off during use

Page 26

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor

is plugged into a properly grounded outlet (see page 13). Use only a single-outlet surge suppres-

sor that meets all of the specifications described on page 13. Important: The treadmill is not com-

patible with GFCI-equipped outlets.

 

 

b. After the power cord has been plugged in, make sure that the key is inserted into the console.

c. Check the reset/off circuit breaker located on the

c

 

treadmill frame near the power cord. If the switch pro-

 

trudes as shown, the circuit breaker has tripped. To

 

 

reset the circuit breaker, wait for five minutes and

Tripped

Reset

then press the switch to the reset position.

PROBLEM: The power turns off during use

 

 

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch to the reset position.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key into the console. d. If the treadmill still will not run, please see the front cover of this manual.

PROBLEM: The displays of the console do not function properly

 

 

 

SOLUTION: a. Remove the key from the console and UNPLUG THE

 

 

 

 

 

 

 

a

 

POWER CORD. Place the treadmill in the storage po-

 

 

sition (see HOW TO FOLD AND MOVE THE TREAD-

 

 

 

MILL on page 25).

 

4

Next, remove the two indicated 3/4" Screws (4).

 

 

 

 

 

 

4

Lower the treadmill (see HOW TO LOWER THE

 

4

4

TREADMILL FOR USE on page 25). Remove the four

44

indicated 3/4" Screws (4), and remove the Hood (44).

 

 

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Mon.-Fri a.m.-6 p.m. MT Sat a.m.-4 p.m. MT QUESTIONS?Model No. WBTL14608.0 Serial No On the WEBTable of Contents Important Precautions Page Power Lines Service Before YOU Begin Assembly Upright Bolts yet Ful not to pinch the Upright Wire HarnessNot tighten the Upright Bolts yet Make sure that no wires are pinched Page HOW to Connect a 75 OHM Catv Cable HOW to Connect AN External Source Using a Catv CableHOW to USE the Chest Pulse Sensor Chest Pulse Sensor Care and MaintenancePRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredPress the Start button to start the program HOW to USE AN Event Training ProgramSelect an event training program Enter your weight HOW to USE a Preset ProgramSelect a preset program HOW to Create a Custom Program Select one of the four custom programsHOW to USE a Custom Program Follow the steps below to use a heart rate program HOW to USE the Stereo Sound System Press the TV button again and select a cable connection HOW to USE the Information ModePress the TV button again and add or delete cable channels HOW to Adjust the Cushioning System HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem Solution ProblemProblem Television reception is poor Problem The chest pulse sensor does not function properlyWorkout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyPart LIST-Model No. WBTL14608.0 Key No. Qty DescriptionDescription Key No. Qty Exploded DRAWING-Model No. WBTL14608.0 124 114 126 125 122 120 110 121 116 7590 123 109 102 112 111 Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents