Weider 160xtb Ful not to pinch the Upright Wire Harness, Not tighten the Upright Bolts yet

2. Identify the Left Upright (73) and the Right	2
Upright (74). Hold the Right Upright near the			97
Right Base Cover (77) as shown. Insert the
Upright Wire Harness (75) up through the rec-			49
tangular hole in the bottom of the Right Upright
and out of the top of the Right Upright.
Gently pull up on the Upright Wire Harness (75)
as you set the Right Upright (74) on the Base			75
(83) inside the Right Base Cover (77). Be care-		73
ful not to pinch the Upright Wire Harness.
Attach the Right Upright (74) to the Base (83)				74
with two Upright Bolts (72) and two Star			76
Washers (90). Note: It may be necessary to tip
the tops of the Uprights forward slightly as you				77
thread the Upright Bolts into the Uprights. Do
not tighten the Upright Bolts yet.				83
Hold the Left Upright (73) near the Left Base
Cover (76), and insert the TV Cable (49) and the
AV Cable (97) up through the rectangular hole in
the bottom of the Left Upright and out of the top				90
of the Left Upright. Attach the Left Upright to the
Base (83) with two Upright Bolts and two Star				72
Washers (not shown). Do not tighten the
Upright Bolts yet.
With the help of a second person, lower the
treadmill off the cardboard stand.
3. Identify the Right Upright Sleeve (96) and the	3
Left Upright Sleeve (95). Slide the Right Upright
Sleeve onto the Right Upright (74), and slide the			95
Left Upright Sleeve onto the Left Upright (73).		73
			“Left”	“Right”
				96
				74

8