Weider 831.159301 user manual Attaching and Removing the Seat

Page 14

ATTACHING AND REMOVING THE SEAT

Set the Seat Frame (36) onto the indicated pin on the Front Upright (42). Attach the Seat Frame to the Front Upright with an M8 x 67mm Carriage Bolt (86) and the Seat Knob (40).

For some exercises, the Seat (13) must be removed. First, make sure that the Chain (not shown) is not attached to the Leg Lever (29). Next, remove the Seat Knob (40) and the M8 x 67mm Carriage Bolt

(86)from the Seat Frame (36). Lift the Seat Frame off the Front Upright (42).

ATTACHING THE LEG LEVER TO THE LOW PULLEY STATION

To use the Leg Lever (29), the seat must be attached to the front upright (see ATTACHING AND REMOV- ING THE SEAT, above).

Remove the Weight Pin (not shown) from the weight stack. Attach the Short Cable (58) to the Eyebolt (35) with a Cable Clip (53). Note: The Weight Pin must also be removed when removing the Short Cable from the Eyebolt.

	40	36
	40	86
13		86	42
		Pin
29
29
35	53
		58

14

Image 14

Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions DecalLeft Side Before YOU BeginRight Side Make Things Easier for Yourself AssemblyFrame Assembly Tighten the M10 Nylon Locknuts 21 used in step Locknut the Press Frame must be able to pivot easily Arm AssemblyTighten the M8 Nylon Locknuts 3 used in steps 2 Assemble the Left Press Arm 73 in the same mannerCable Assembly Attach the Right Arm 48 in the same mannerHook Ball Bracket Seat Assembly Page Attaching the Accessories AdjustmentsChanging the Weight Setting Attaching and Removing the Seat Attaching the LEG Lever to the LOW Pulley StationWeight Resistance Chart Troubleshooting Tightening the CablesCable Diagrams Long Cable Short CableExercise Guidelines Staying Motivated Muscle ChartCooling Down Part Identification CHART-Model No .159301 R0304A Page Part LIST-Model No Key No. Qty DescriptionExploded DRAWING-Model No R0304AFull 90-DAY Warranty Sears, Roebuck and Co., Dept 817WA, Hoffman Estates, IL