2.Orient the Crossbar (2) so that the warning decal is in the indicated location. Attach the Crossbar to an Upright (1) with two M10 x 66mm Bolts (28), two Joint Plates (11), and two M10 Nylon Locknuts (31). Do not tighten the Locknuts yet.
Repeat this step with the other Upright (1).
3.Attach the Front Leg (4) to the Bench Frame (3) with an M10 x 66mm Bolt (28), an M10 x 19mm Screw (5), an M10 Washers (30), and an M10 Nylon Locknut (31). Do not tighten the Locknut or Screw yet.
4.Attach the Bench Frame (3) to the Crossbar (2) with two M10 x 68mm Bolts (27) and two M10 Nylon Locknuts (31).
2 |
|
|
|
|
| 1 |
|
|
| 31 | 1 |
| 11 |
| |
| 11 |
| |
|
|
| |
| 28 | 2 |
|
|
|
| |
|
| Warning |
|
|
| Decal |
|
3 |
| 5 |
|
|
|
| |
|
| 28 | 3 |
31 |
|
| |
30 |
|
| |
| 4 |
| |
|
|
| |
4 |
|
|
|
|
| 2 | 27 |
|
| 3 |
|
|
| 31 |
|
6 |
|
|
|