Weider 831.159010 user manual

Page 21

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the center of this manual. Important:

Some parts may have been pre-assembled for shipping. If you cannot find a part in the parts bags, check to see if it has been pre-assembled.

Note: Assembly is divided into four stages: 1) frame assembly, 2) arm assembly, 3) cable assembly, and 4) seat assembly. The hardware for each stage is packaged separately. Wait until you begin each stage to open the parts bag for that stage.

Image 21

Contents SEARS, Roebuck and CO. Hoffman ESTATES, IL Model No Serial NoTable of Contents Important Precautions Using the weight system. If you have additional Before YOU BeginFor your benefit, read this manual carefully before Make Things Easier for Yourself AssemblyDo not tighten the M10 Nylon Locknuts 71 yet Tighten the M10 Nylon Locknuts 71 used in steps ARM AssemblyRepeat this step with the Left Butterfly Arm Locknut the Pivot Bracket must be able to pivot easilyCable Assembly Page Page Page Seat Assembly Attaching the Accessories to a Pulley Station AdjustmentsAdding Weights to the Weight Carriage Tightening the CablesConverting the Butterfly Arms Weight Press ARM Butterfly LOW Pulley LEG Lever High Pulley Weight Resistance ChartButterfly Cable High Cable Low Cable Cable DiagramsExercise Guidelines Muscle Chart Cooling DownStaying Motivated Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Hoffman ESTATES, IL SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, ILPage Page Page Part Identification CHART-Model No .159010 R1002A Remove this Part LIST/EXPLODED Drawing From the Manual Qty Description Part LIST-Model NoExploded