Weider 831.159010 instruction

20. Wrap the High Cable (45) around a 90mm Pulley	20			38
(38). Attach the Pulley inside the Top Frame (8)	20
(38). Attach the Pulley inside the Top Frame (8)			26
with an M10 x 70mm Bolt (58), two M10 Washers			26	45
(26), two 13mm Spacers (34), and an M10 Nylon				45
(26), two 13mm Spacers (34), and an M10 Nylon			71
Locknut (71).			71
Locknut (71).			34	34
			34	34
				58
			8	26
			8
21. Attach the eyelet end of the High Cable (45) to	21
the M10 x 20mm Bolt (67) in the bracket on the	21
the M10 x 20mm Bolt (67) in the bracket on the			45
Weight Carriage (14) with an M10 Nylon Locknut			45
(71).
				67
			71
			14
22. Locate the Low Cable (47). Route the Cable	22
through the cage and rest it in the brackets on the	22
through the cage and rest it in the brackets on the
Center Base (2).
Attach a 90mm Pulley (38) inside the indicated		38
Attach a 90mm Pulley (38) inside the indicated
bracket on the Center Base (2) with an M10 x				71
47mm Bolt (61) and an M10 Nylon Locknut (71).				71
				47
	61		2
			Cage
23. Attach a 90mm Pulley (38) inside the indicated	23
bracket on the Center Base (2) with an M10 x	23
bracket on the Center Base (2) with an M10 x
47mm Bolt (61) and an M10 Nylon Locknut (71).
			38
	61		71
			71
			2
	11