Weider 831.159361 user manual Adjustment, Changing the Weight Setting

Page 19

ADJUSTMENT

The instructions below describe how each part of the home gym system can be adjusted. Refer to the exercise poster accompanying this manual to see how the home gym system should be set up for each exercise. IMPOR-

TANT: When attaching the lat bar or nylon strap, make sure that the attachments are in the correct start- ing position for the exercise to be performed. If there is any slack in the cables or chain as an exercise is performed, the effectiveness of the exercise will be reduced.

CHANGING THE WEIGHT SETTING

To change the weight setting of the weight stack, insert a Weight Pin (26) under the desired Weight

(25). Be sure to insert the Weight Pin until the bent end of the Weight Pin is touching the Weights, and turn the bent end downward. The weight setting of the weight stack can be changed from 6.5 pounds to

106.5pounds, in increments of 12.5 pounds. Note:

Due to the cables and pulleys, the amount of resistance at each exercise station may vary from the weight setting. Use the WEIGHT RESISTANCE CHART on page 21 to find the approximate amount of resistance at each weight station.

ATTACHING THE LAT BAR OR NYLON STRAP TO THE HIGH PULLEY STATION

Attach the Lat Bar (54) to the Medium Cable (23) with a Cable Clip (53). For some exercises, the Chain (52) should be attached between the Lat Bar and the Medium Cable with two Cable Clips. Adjust the length of the Chain between the Lat Bar and the Medium Cable so the Lat Bar is in the correct starting position for the exercise to be performed.

The Nylon Strap (39) can be attached in the same manner.

ATTACHING THE LAT BAR OR NYLON STRAP TO THE LOW PULLEY STATION

Attach the Lat Bar (54) to the Long Cable (86) with a Cable Clip (53). For some exercises, the Chain (52) should be attached between the Lat Bar and the Long Cable with two Cable Clips. Adjust the length of the

Chain between the Lat Bar and the Long Cable so the Lat Bar is in the correct starting position for the exercise to be performed.

The Nylon Strap (39) can be attached in the same manner.

25

26

39

53

23

52

54

39

52

86 53

54

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model No Serial No Patent PendingSEARS, Roebuck and CO., Hoffman ESTATES, IL Important Precautions Table of ContentsBefore YOU Begin Assembled DimensionsFollowing Tools not Included are Required for Assembly AssemblyFrame Assembly Chart located in the center of this manualFrame AssemblyFrame Assembly Tighten all Nylon Locknuts used in steps 2 through Frame Assembly ARM AssemblyARM Assembly Long Cable Trap is positioned to hold A 3/8 Nylon Locknut 21. Be sure thatCable in place Cable Assembly Cable Assembly Cable Assembly Assembly Cable Cable Assembly Cable Assembly Seat Assembly Seat Assembly Locknut. The Leg Lever must be able to pivot freely Are not properly installed, they may be Rect the problem. Important If the cablesChanging the Weight Setting AdjustmentAttaching and Removing the Seats Attaching the LEG Lever to the LOW PUL- LEY StationWeight Resistance Chart Tightening the Cables TROUBLE-SHOOTING and MaintenanceLong Cable Cable DiagramHigh Pulley Medium Cable Short CablePage Page Page Key Part Qty Description Part LIST-Model NoExploded DRAWING-Model No Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL

831.159361 specifications

The Weider 831.159361 is a versatile home gym system designed to facilitate a wide range of strength training exercises in a compact and accessible format. Ideal for fitness enthusiasts who seek to build muscle and improve overall fitness without the need for a large gym setup, this machine incorporates various key features and technologies that set it apart from competitors.

One of the standout characteristics of the Weider 831.159361 is its multi-functionality. The machine comes equipped with a chest press, leg developer, bicep curl, and a lat pulldown station, allowing users to target all major muscle groups effectively. This versatility means that a full-body workout can be accomplished with just one piece of equipment, making it an appealing choice for those with limited space.

A significant feature of the Weider 831.159361 is its sturdy construction. Made from high-quality materials, it is designed to withstand intense workouts, ensuring longevity and durability. The frame is robust, providing stability during heavy lifting, while the comfortable padding supports users during exercises, reducing the risk of injury and enhancing workout comfort.

Additionally, the Weider 831.159361 incorporates a weight stack system that allows for incremental weight adjustments, catering to users of all fitness levels. With the ability to modify resistance easily, individuals can consistently challenge their muscles as they progress without the need for additional free weights.

The presence of adjustable components is another attractive aspect of the Weider 831.159361. The machine allows for customization to suit individual body types and preferences, ensuring that everyone can find their optimal position for each exercise. This adaptability can lead to improved results, as proper form is easier to maintain.

Moreover, the machine’s compact design means it can fit into smaller spaces, making it ideal for home gyms or apartment settings where space is at a premium. Coupled with clear instructional materials, the Weider 831.159361 is user-friendly, making it a great choice for both beginners and experienced lifters alike.

In conclusion, the Weider 831.159361 is a well-rounded home gym solution, offering safety, versatility, and effective strength training capabilities all in one package. As a result, it represents a practical option for individuals looking to enhance their fitness regimen from the comfort of their homes.
Top Page Image Contents