Weider WESY19541 user manual

18.Locate the Low Cable (53). Route the Cable through the Leg Lever (8) and the Front Leg (7).

Attach a 90mm Pulley (48) inside of the Leg Lever (8), over the Low Cable (53), with an M10 x 67mm Bolt (71), two M10 Washers (57), two 12mm Spacers (52), and an M10 Nylon Locknut (56).

19.Attach a 90mm Pulley (48) inside of the Front Leg (7), over the Low Cable (53), with an M10 x 67mm Bolt (71), two M10 Washers (57), two 12mm Spacers (52), and an M10 Nylon Locknut (56).

20.Route the Low Cable (53) under a 90mm Pulley (48) and through the Upright (3). Attach the Pulley inside of the upright with an M10 x 67mm Bolt (71), two M10 Washers (57), two 12mm Spacers (52), and an M10 Nylon Locknut (56).

21.Route the Low Cable (53) over a 90mm Pulley (48). Attach the Pulley and two Half Finger Guards (43) to the Double “U”-Bracket (63) with an M10 x 46mm Bolt (81) and an M10 Nylon Locknut (56). Make sure the Finger Guards are on the outside of the “U”-bracket as shown.

18
		56	8		48
			52
		57			7
		53			57
					52
					71
19
56		52			48
				7
					53
57
					57
					52
					71
20
56	52
57				3
		48
53					57
					52
					71
21
			56
				63
			43 48		43
				53	81

12