Weider WESY16010 user manual Seat Assembly

Page 14

SEAT ASSEMBLY

27.Press 3/4” Round Inner Caps (34) into the ends of both Pad Tubes (28).

Insert one Pad Tube (28) into the Seat Frame (36). Slide a Foam Pad (30) onto each end of the Pad Tube.

Insert the other Pad Tube (28) into the Leg Lever (29). Slide a Foam Pad (30) onto each end of the Pad Tube.

27
36	30
36	34
	28
	34
	30
	29

28.Make sure that all parts have been properly tightened. The use of all remaining parts will be explained in ADJUSTMENT, beginning on page 15 of this manual.

Before using the home gym, pull each cable a few times to make sure that the cables move smoothly over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPOR-

TANT: If the cables are not properly routed, they may be damaged when heavy weight is used. See the CABLE DIAGRAM on page 19 of this manual for proper cable routing. If there is any slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOT- ING AND MAINTENANCE on page 18.

14

Image 14

Contents Customer HOT Line QUESTIONS?Model No. WESY16010 Serial No Table of Contents Important Precautions For your benefit, read this manual carefully before Using the Weider 8920 home gym. If you haveBefore YOU Begin Assembly Following Tools not Included are Required for AssemblyTighten all Nylon Locknuts used in steps Through Refer to drawing 2b. Align the holeTighten the Nylon Locknuts yet ARM Assembly Cable Assembly Cable Assembly 2117 Bracket Ball Crossbar Inset shows view From other sideSeat Assembly Locknut. The Leg Lever must pivot freely Seat Assembly Adjustment Adding Weights to the Weight CarriageEyebolt is positioned vertically on the Leg Lever Attaching and Removing the SeatAttaching the LEG Lever to the LOW Pulley Station Lbs Weight Resistance ChartWeight on Press ARM Butterfly ARM LOW Pulley High Pulley LEG LeverTROUBLE-SHOOTING and Maintenance Tightening the CablesShort Cable Cable DiagramLong Cable 58 TOP View Page Page Part LIST-Model No. WESY16010 Qty DescriptionExploded DRAWING-Model No. WESY16010 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty Remove this Part Identification Chart from the Manual 4 Square Inner Cap Square Outer Cap 2 Square Inner Cap