Weider WESY16010 user manual Remove this Part Identification Chart from the Manual

Page 25

REMOVE THIS PART IDENTIFICATION

CHART FROM THE MANUAL!

This chart is provided to help you identify the small parts used in assembly. Important: Some parts may have been pre-assembled for shipping purposes; if you cannot find a part in the parts bags, check to see if it has been pre-assembled.

Note: Assembly is divided into four stages: 1) frame assembly, 2) press and butterfly arm assem- bly, 3) cable and pulley assembly, and 4) seat and backrest assembly. The hardware for each stage is packaged separately. Wait until you begin each assembly stage to open that parts bag.

WESY16010 R0801A

Image 25

Contents Model No. WESY16010 Serial No QUESTIONS?Customer HOT Line Table of Contents Important Precautions Before YOU Begin Using the Weider 8920 home gym. If you haveFor your benefit, read this manual carefully before Following Tools not Included are Required for Assembly AssemblyTighten the Nylon Locknuts yet Refer to drawing 2b. Align the holeTighten all Nylon Locknuts used in steps Through ARM Assembly Cable Assembly Cable Assembly 2117 Bracket Ball Crossbar From other side Inset shows viewSeat Assembly Locknut. The Leg Lever must pivot freely Seat Assembly Adding Weights to the Weight Carriage AdjustmentAttaching the LEG Lever to the LOW Pulley Station Attaching and Removing the SeatEyebolt is positioned vertically on the Leg Lever Weight on Press ARM Butterfly ARM LOW Pulley High Pulley Weight Resistance ChartLbs LEG LeverTightening the Cables TROUBLE-SHOOTING and MaintenanceLong Cable 58 TOP View Cable DiagramShort Cable Page Page Qty Description Part LIST-Model No. WESY16010Exploded DRAWING-Model No. WESY16010 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Remove this Part Identification Chart from the Manual 4 Square Inner Cap Square Outer Cap 2 Square Inner Cap