Weider WEBE44490 user manual Make sure that the Weight Carriage is oriented as shown

Page 11

15.Slide the Weight Carriage (47) onto the Lat Tower (9).

Make sure that the Weight Carriage is oriented as shown.

Slide the loop on the Cable (45) onto the M10 x 19mm Bolt (46) in the Weight Carriage (47). Attach the Cable with an M10 Nylon Locknut (11).

Next, slide the Carriage Stop (24) onto the Lat Tower

(9). Make sure that the Carriage Stop is turned so the lip of the Carriage Bushing (2) is on top. Attach the Carriage Stop to the indicated hole in the Lat Tower with the M8 x 70mm Bolt (48) and an M8 Nylon Locknut (13).

16.Insert the Lat Tower (9) into the Front Leg (19). Make sure that the Lat Tower is turned as shown.

Secure the Lat Tower with the Adjustment Knob (36).

15
45		9
		46
11
		47
		13
	48	2
	48	24
		24
16
	9
		36
	19

11

Image 11

Contents Mon.-Fri., 6 a.m.-6 p.m. MST Model No. WEBE44490 Serial NoCustomer HOT Line Table of Contents Important Precautions Right Side Before You BeginLeft Side Part Identification Chart Assembly Crossbar is turned so the decal is facing up While a second person holds the Right UprightTighten all M10 Nylon Locknuts used in steps 1 through Tighten the M6 x 63mm Screw Do not tighten the Screw yetPage Make sure that the Weight Carriage is oriented as shown Make sure that both Weight Rests are at the same height Using the Weight Rests and Safety Spotters Adjusting the Weight BenchAdjusting the Backrest Attaching the Curl Post or LAT Tower Make sure that you fully tighten the Adjustment KnobAdjusting the PAD Tube Attaching Weights to the LEG LeverAttaching Weights to the Weight Carriage Adjusting the Bench for Squat ExercisesAttaching the LAT BAR to the LAT Tower Exercise Guidelines Staying Motivated Muscle ChartCooling Down Thursday Aerobic Exercise Date Exercise Weight Sets RepsDate Aerobic ExerciseQty Description Part List-Model No. WEBE44490WEBE44490 Exploded DrawingIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty