Weider WESY2916.1 user manual

31. Attach a 90mm Pulley (48) to the Front Leg (10)
	31
with an M10 x 65mm Bolt (85), two M10 Washers
(80), two 13mm Steel Spacers (109), and an M10
Nylon Locknut (77). Make sure the Leg Lever
Cable (51) is under the Pulley.

10 85

80 109

48

51

109

80

77

32. Route the Leg Lever Cable (51) under the	32
89.5mm Spacer (59), through the Upright (2), and
under the indicated rod in the Base (1). Wrap the
Leg Lever Cable around a 90mm Pulley (48).
Attach the Pulley to the Base with an M10 x
45mm Bolt (86), two Half Guards (55), and an
M10 Nylon Locknut (77).	86	48
				51
	55
	59
		1	55	77
	Rod

33. Wrap the Leg Lever Cable (51) over a 90mm 33 Pulley (48). Attach the Pulley, a Cable Trap (56),

and two Half Guards (55) to the second hole from the bottom of the Pulley Plates (60) with an M10 x 50mm Bolt (97) and an M10 Nylon Locknut

(77). Make sure the Cable Trap and the Half

Guards are oriented as shown.

60	55
77
	97
55
56	48
51

19