Weider WESY91080 guide

29.Move to the other side of the unit. Route the Long Cable (58) around the second 3 1/2Ó Pulley (15) on the Leg Press Arm (89) in the direction shown.

30.Route the Long Cable (58) around the 3 1/2Ó Pulley (15) on the Butterfly Base (4).

Attach the Long Cable to the Long ÒUÓ-Bracket (57) with a 1/4Ó Nylon Locknut (2) and a 1/4Ó Flat Washer (10).

Do not completely tighten the Nylon Locknut. It should be threaded onto the end of the Cable only a couple of turns, as shown in the inset drawing.

31.Locate the Medium Cable (86). It has a closed loop on one end and a ball on the other.

Wrap the end of the Medium Cable with the ball around a 3 1/2Ó Pulley (15) in the direction shown. Attach the Pulley to the Butterfly Upright (42) with a 3/8Ó x 3 3/4Ó Bolt (71), a 3/8Ó Flat Washer (9) and a 3/8Ó Nylon Jam Nut (83).

32.Wrap the Medium Cable (86) around a 3 1/2Ó Pulley

(15)in the direction shown.

Attach the 3 1/2Ó Pulley (15) and a Cable Trap (66) to the two ÒIÓ-plates (81) with a 3/8Ó x 2Ò Bolt (12) and a 3/8Ó Nylon Locknut (21).

Make sure the Cable Trap (66) is positioned as shown.

29
		89
15
		58
30		57
		57
			2
			10
		58
	57
	2
	10	15	4
		15

31
			42
			83
			9
		15	86
	71	15
	71
32
			81
			66
15			21
			21
12			86
			86

29
		89
15
		58
30		57
		57
			2
			10
		58
	57
	2
	10	15	4
		15

31
			42
			83
			9
		15	86
	71	15
	71
32
			81
			66
15			21
			21
12			86
			86

29
		89
15
		58
30		57
		57
			2
			10
		58
	57
	2
	10	15	4
		15

31
			42
			83
			9
		15	86
	71	15
	71
32
			81
			66
15			21
			21
12			86
			86

29
		89
15
		58
30		57
		57
			2
			10
		58
	57
	2
	10	15	4
		15

31
			42
			83
			9
		15	86
	71	15
	71
32
			81
			66
15			21
			21
12			86
			86