Weider WESY91080 manual Butterfly Arm Assembly

14.Press a 1 3/4Ó Square Inner Cap (44) into the lower end of each Press Arm (46).

Press a 1Ó Round Inner Cap (49) into the side of each Press Arm.

Attach each Press Arm to the Press Frame (17) with two 5/16Ó x 2 1/2Ó Bolts (22) and two 5/16Ó Nylon Locknuts (3).

15.Butterfly Arm Assembly

Attach a ÒVÓ-Pulley (6) and a Long Cable Trap (50) to each Butterfly Arm (47) and (48) with a 3/8Ó x 2 1/2Ó Bolt (7) and a 3/8Ó Nylon Locknut (21).

Make sure the Long Cable Traps (50) are posi- tioned as shown.

Identify the Right Arm (48) and the Left Arm (47) by imagining yourself sitting on the seat. Note the posi- tion of the welded bracket (A) on each Arm. Arm identification is very important for the next step.

9

14
17
22
	3
46
49
44
15
7	50
	6
50
6	A
A
	47
	21
48