53.Wrap the Low Cable (86) around a 3 1/2Ó Pulley (82) in the direction shown. Attach the Pulley and two Pulley Covers (94) to the indicated hole in the Leg Lever (15) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó Washers (38) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the Pulley Covers as shown.
54.Wrap the Low Cable (86) around a 3 1/2Ó Pulley (82) in the direction shown. Attach the Pulley and two Pulley Covers (94) to the indicated hole in the Ab Upright (1) with a 3/8Ó x 3 3/4Ó Bolt (76), two 3/8Ó Washers (38) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the Pulley Covers as shown.
55.Route the Low Cable (86) through the slot in the Rear Seat Frame (16) and place it in the bracket on the Weight Base (14).
Attach a 3 1/2Ó Pulley (82) inside the bracket on the Weight Base (14) with a 3/8Ó x 1 3/4Ó Bolt (66) and a 3/8Ó Nylon Locknut (42). Orient the wide tab on the
Pulley Covers as shown.
SEAT ASSEMBLY
56.Locate and open the parts bag labeled ÒSEAT ASSEMBLY.Ó
Attach the Small Backrest (18) to the Ab Upright (1) with two 1/4Ó x 2 1/2Ó Machine Screws (64) and two 1/4Ó Washers (37).
53 |
|
42 | 86 |
| 38 |
| 82 |
| 15 |
| 38 |
| 76 |
| 94 |
| Wide Tab |
54 |
|
|
|
| 38 | Wide Tab |
|
| 42 |
| |
|
|
| |
|
| 82 |
|
|
| 94 |
|
|
| 94 | 76 |
|
| 38 |
|
55 |
|
|
|
| 82 | 16 |
|
42 |
|
| |
| 14 |
| |
|
|
| |
30 |
| Slot |
|
|
|
| |
|
| 66 |
|
| Bracket |
|
|
56 |
|
|
|
|
| 1 |
|
|
| 37 |
|
|
| 64 |
|
| 18 |
|
|
20