Installation Instructions

This washer is equipped with a power supply cord having a 3 prong grounding plug.

To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong, grounding-type outlet, grounded in accordance with local codes and ordinances. If a mating outlet is not available, it is the personal responsibility and obligation of the customer to have the properly grounded outlet installed by a qualified electrician.

If codes permit and a separate ground wire is used, it is recommended that a qualified electrician determine that the ground path is adequate.

Do not ground to a gas pipe.

Check with a qualified electrician if you are not sure the washer is properly grounded.

Do not have a fuse in the neutral or ground circuit.

Remove Transport System

WARNING

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately 3 ft (900 mm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during transportation. These bolts also retain the power cord inside the washer until the bolts are removed.

1.Using a 13 mm wrench, loosen each of the bolts.

2.Once the bolt is loose, move it to the center of the hole and completely pull out the bolt, including the plastic spacer covering the bolt.

3.Once all 4 bolts are removed, discard bolt and spacers. Then pull the power cord through the opening of the rear panel and close the hole with the attached cap.

4.Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid suspension and structural damage to your washer, it must be properly set up for relocation by a certified technician.

W10157503D specifications

The Maytag W10157503D is a vital component in the world of home appliance replacement parts, particularly known for its role in enhancing the efficiency and effectiveness of Maytag appliances. This specific part serves as a high-quality, factory-certified component designed to ensure optimal performance and longevity in your Maytag appliances.

One of the main features of the W10157503D is its compatibility with various Maytag models. This part is engineered to fit seamlessly into a range of Maytag washers and dryers, making it a versatile solution for homeowners looking to maintain, repair, or upgrade their appliances. The design of the W10157503D allows for easy installation, meaning users can replace worn or malfunctioning components without the need for professional assistance, saving both time and money.

In terms of technology, the W10157503D is constructed with robust materials designed to withstand the rigors of everyday use. This part undergoes rigorous testing to ensure that it meets high industry standards for performance and durability. When integrated into compatible Maytag appliances, the W10157503D contributes to improved energy efficiency, helping to lower utility bills while also being more environmentally friendly.

The characteristics of the W10157503D make it a reliable choice for those looking to maintain their Maytag appliances. It boasts a reliable performance history and is backed by Maytag's reputation for quality. Users often report that once this part is installed, their appliances operate more efficiently and with fewer disruptions, allowing for a more seamless laundry experience.

In conclusion, the Maytag W10157503D is an essential part for those who own compatible Maytag appliances. Its excellent compatibility, ease of installation, robust construction, and commitment to energy efficiency make it a top choice for homeowners seeking to restore or upgrade their laundry systems. Investing in the W10157503D means investing in reliability and performance, ensuring that your appliances continue to function at their best.