Maytag W10157503D manual Options, Parts supplied, Pedestal, Alternate Parts, Stack Kit

Tools needed for installation

„Open end wrenches 17 mm and 13 mm

„Level

„Wood block

„Ruler or measuring tape

Parts supplied:

AB

C

F

Options

Pedestal

A pedestal will add to the total height of the washer for a total height of 53.5" (1359 mm).

D E

G

Optional pedestal

This pedestal is available in several colors.

A. Drain hose form

B. Inlet hose (2)

C. Inlet hose washers (4)

D. Transport bolt hole plug (4)

E.Beaded strap

F.Drain hose G. Hose clamp

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the items listed here, call the toll-free number on the cover or in the “Assistance or Service” section.

If You Have	You Will Need to Buy
Laundry tub or standpipe	Sump pump system (if not already available)
taller than 96" (2.4 m)
Overhead sewer	Standard 20 gal. (76 L), 30" (762 mm) tall drain tub or
	utility sink and sump pump (available from local plumbing
	suppliers)
Floor drain	Siphon break, Part Number 285834; additional drain hose
	Part Number 8318155; and connector kit, Part
	Number 285835
Drain hose too short	4 ft (1.2 m) drain hose extension kit, Part Number 285863
Water faucets beyond reach	2 longer water fill hoses:
of fill hoses	6 ft (1.8 m) Part Number 76314,
	10 ft (3.0 m) Part Number 350008

To order, call the dealer from whom you purchased your washer or refer to the “Assistance or Service” section.

Pedestal Height	Color	Part Number
10" (254 mm)	White	MHP1000SQ
10" (254 mm)	Black	MHP1000SB
15.5" (394 mm)	White	XHP1550VW
15.5" (394 mm)	Black	XHP1550VB
15.5" (394 mm)	Slate	XHP1550VE
15.5" (394 mm)	Crimson Red	XHP1550VF
15.5" (394 mm)	Oxide	XHP1550VJ
15.5" (394 mm)	Evergreen	XHP1550VP

Stack Kit

Are you planning to stack your Maytag washer and dryer? To do so you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or refer to the “Assistance or Service” section. Ask for Part Number 8212640.

5