option (HOT) |
NO WATER SUPPLY
Is the water supply
NO
Is the tap opened? | NO | |
YES |
| |
Is the inlet valve filter clogged with impurity? | YES | |
NO |
| |
Is resistance of the inlet valve connector | NO | |
between the 2 to 8 k ? | ||
|
YES
Check the voltage between each terminals of inlet
Valve is 220 - 240V~.NO (Refer to
Open the tap.
Clean the filter.
Replace the inlet valve.
Replace PWB assembly
option (HOT) |
Wiring diagram |
maxMAX
MAIN PRE -
WASH WASH
SOFTENER
DETERGENT DOES NOT FLOW IN
Is water supplied? | NO | |
YES |
| |
Are replaceptacles correctly connected to the | NO | |
terminals of inlet valve? | ||
| ||
YES |
| |
Is detergent put in the correct compartment of | NO | |
the drawer? | ||
| ||
YES |
| |
Is the detergent caked or hardened? | YES |
Refer to solution
NO INLET
Check the wiring on the dispenser.
Put the detergent in the correct position
PRE+MAIN
MAIN WASH
: Detergent
Clean the drawer.
21