Playing records

Preparation

1.Put a record on the turntable.

2.Take off the stylus cover and release the arm clamp.

•The pilot lamp comes on.

•33 1/3 r/min is automatically selected and the indicator lights.

•Press [45] if you are playing a 45 r/min record.

2Press [start-stop].

The turntable starts revolving.

start • stop

The pitch returns to 33 1/3 or 45 r/min.

Use the above indicated

To temporarily stop play

Lift the cue lever.

The stylus lifts off the record.

Refer to page 9 for fine adjustments to the pitch

When using EP records		EP record adaptor
1.	Take the EP record adaptor out
	of its holder and fit it over the
	center spindle.
2.	Press [45] to change the speed.

1.Lift the cue lever and move the tone arm back to the arm rest.

2.Press [start-stop].

The electronic brake gently stops the turntable.

3.Turn [power] to turn the unit off.

4.Clamp the tone arm and put the stylus cover back on.

4Lift the cue lever and move the tone arm over the record.

Cue lever

The tone arm moves down and play starts.

Use the disc slip sheet instead of the turntable mat. This enables the record to be easily moved during play.

•Top (printed side): Lay the record on this side.

•Bottom: Slippery side.

For a different kind of slip

Put the transparent sheet under

•Press the stylus light switch. The stylus light rises up and illumi- nates the stylus.

•When the light is not required, press it down. The light also goes out.

Press the switch firmly. If the switch is lightly pressed, the light may come on but not rise up.

Stylus light

Stylus light switch

RQT7018