Electrolux 74689 manual Setting the delay timer / soaking duration, Delay timer, Soaking duration

Operating Instructions

Setting the delay timer / soaking duration

	Delay timer
	The DELAY TIMER button allows the start of a
	washing programme to be delayed by 1 hour up
	to a maximum of 19 hours.
0	To do this, press the DELAY TIMER button
	repeatedly until the desired start delay is
	shown in the multi display, for example
	12h for a 12 hour delay.
	If 19h is displayed and you press again, 0h ap-
	pears, followed by the duration time of the set
	programme (displayed in minutes e. g.126). In
	this state the start delay timer is not set.
3	Once the delay timer has been set, it will only be activated after press-
	ing the START/PAUSE button.

	Soaking duration
	When the SOAKING button is pressed, you can extend the soaking pe-
	riod with the DELAY TIMER button (maximum 10 hours and
	approx. 20 minutes).
3	Without DELAY TIMER, the soaking period is approximately 30 minutes,
	plus a pre-wash time of 20 minutes.

0To adjust, press the DELAY TIMER button as often as necessary until the required soaking period is shown in the multi display, e.g.1h (=1 hour).

After approximately 2 seconds, the multi display shows the duration in minutes.

	This duration time is made up as follows:
	Selected soaking period	e.g.	1h =60 Minutes
	+ Heating-up / pre-wash time	e.g.	Approx. 20	Minutes
	+ Duration of the selected wash programme e.g.		Approx. 126	Minutes
	= Displayed value	e.g.	Approx. 206	Minutes
3	While SOAKING is running, PRE WASH lights up on the programme
	progress display.

20