Electrolux 74689 manual Washing cycle is complete/Removing the washing

Page 26

Operating Instructions

Washing cycle is complete/Removing the washing

Once the washing programme has come to an end, END illuminates on the programme progress display.

If RINSE HOLD was selected, the display beside the START/ PAUSE button flashes.

01. After a rinse hold, the water must first be pumped out:

–Either press the START/PAUSE button (the water is pumped out and the washing is spun according to the completed programme; After the START/PAUSE button is pressed again, the spin speed can still also be changed during spinning),

or

–Turn the programme selector to OFF and then to PUMP OUT and press the START/PAUSE button (the water is pumped out without spinning), or

–Turn the programme selector to OFF and then to SPIN or SHORT SPIN

and press the START/PAUSE button (the water is pumped out and the washing is spun or gently spun).

At the end of this programme step, the END indicator will illuminate.

2.Open the door.

As soon as the DOOR indicator lights up green, the door can be opened.

3.Remove the washing.

4.Turn the programme selector to OFF.

5.Close the water tap.

6.After washing, pull out the washing detergent dispenser drawer slightly so that it can dry out. Leave the door ajar so that air can circulate in the drum.

3	If the OVERDOSING indicator illuminates, then too

	much detergent was used in the washing programme
	just completed. Observe the dosing recommendations
	of the detergent manufacturer as well as the load quantity for the next
	wash.

Important! If the washing machine is not to be used for a long period: Close the water tap and disconnect the washing machine from the electricity mains.

26

Image 26

Contents ÖKO-LAVAMAT 74689 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Main washing cycle Cottons / Linen at 30 C to 95 C Control panelProgramme selector Be combined with Quick WashWool P hand wash Programme option buttons What does Update mean? Consumption dataSorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washingSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer See Programme Tables for maximum loads Opening and closing the doorLoading the washing Close the door firmlyDetergents and conditioners If using liquid detergent / tabletsAdd detergent / conditioner Push the detergent dispenser drawer fullyPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Washing Programme Progress Change the washing programmeChanging the Spin Speed Washing cycle is complete/Removing the washing WashProgramme tables WashingSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterCancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+Washing programme can be Child Safety FeatureCancelling the child safety feature StartedDimensions in mm Technical dataDimensions Installation Safety Precautions Remove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedUser Permanent ConnectionTerference Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Measurements in mm Fitting under kitchen worktopsRecess size requirements Warranty conditions Great BritainIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG