Electrolux 74689 manual Water Drainage

Page 50

Installation and connection instructions

Water Drainage

The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece“ supplied. The standpipe should have an internal diameter of approximately 38 mm (see dia- gram) thus ensuring there is an air break between the drain hose and standpipe.

Important! It is essential to lay the drainage hose without kinks.

When discharging into a stand- pipe ensure that the top of the curve in the hose end is no more than 90 cm (35.4’’) and no less than 60 cm (23.6’’) above floor level.

The upright standpipe should have a minimum, length of

30 cm (12’’) from the bottom of the elbow to the top of the pipe (see diagram). Make sure that it is designed in such a way that the end of the drain hose cannot be covered with water.

Longer drain hoses are available in lengths of 2.7 and 4 metres from your AEG Service Force Centre.

50

Image 50

Contents ÖKO-LAVAMAT 74689 update Future owners Dear CustomerPages of this instruction book ApplianceContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up Child Safety General SafetyEnvironmental tips When disposing of the washing machineDisposal PackagingDetergent dispenser drawer Description of the ApplianceFront view Main washing cycle Cottons / Linen at 30 C to 95 C Control panelProgramme selector Be combined with Quick WashWool P hand wash Programme option buttons What does Update mean? Consumption dataSorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Setting the Washing Programme Possible programme options to suit the type of washingSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer See Programme Tables for maximum loads Opening and closing the doorLoading the washing Close the door firmlyDetergents and conditioners If using liquid detergent / tabletsAdd detergent / conditioner Push the detergent dispenser drawer fullyPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Washing Programme Progress Change the washing programmeChanging the Spin Speed Washing cycle is complete/Removing the washing WashProgramme tables WashingSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Washing Machine Drum Maintenance WashTo run a maintenance wash Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If after the last rinse foam is still visible If the washing results are not satisfactoryIf there are still grey stains on the washing If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterCancelling the additional rinse function When the water is completely drainedSetting the additional rinse function Additional Rinse RINSE+Washing programme can be Child Safety FeatureCancelling the child safety feature StartedDimensions in mm Technical dataDimensions Installation Safety Precautions Remove transport packaging Installation of the applianceTransporting the appliance Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedUser Permanent ConnectionTerference Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Measurements in mm Fitting under kitchen worktopsRecess size requirements Warranty conditions Great BritainIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG