Electrolux 74689 manual Starting the washing programme, Pressed, the door is not properly closed

Page 23

Operating Instructions

Starting the washing programme

01. Check that the water tap is open.

2.Start the washing programme:

Press the START/PAUSE button

The washing programme is started or starts at the end of the time delay set.

3	If the DOOR display flashes red when the START/PAUSE button is
	pressed, the door is not properly closed.

– The display DOOR flashes red

– The error code E40 then flashes in the multi display

– And the MAIN WASH display flashes.

In this case, press the door firmly closed and again press the START/PAUSE button.

If the delay timer has been set:

The start time delay set on the time delay counts down; the time remaining until the programme starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button re- peatedly until the desired time is displayed. When the programme duration is displayed (display in minutes e. g.126) the washing programme starts without delay.

23

Image 23

Contents ÖKO-LAVAMAT 74689 update Appliance Dear CustomerPages of this instruction book Future ownersContents Installation and connection instructions Page Intended Use SafetyPrior to initial start-up General Safety Child SafetyPackaging When disposing of the washing machineDisposal Environmental tipsDetergent dispenser drawer Description of the ApplianceFront view Be combined with Quick Wash Control panelProgramme selector Main washing cycle Cottons / Linen at 30 C to 95 CWool P hand wash Programme option buttons Consumption data What does Update mean?Sorting and preparing a wash load Before the first washPreparing a Wash Load Washing Types and Care Symbols Water hardness details Quantities of detergent and conditioners?Water softening Brief instructions When the washing programme has endedRunning a washing cycle Possible programme options to suit the type of washing Setting the Washing ProgrammeSelecting the rinse hold function Changing the spin speed/Selecting the rinse hold functionChanging the spin speed Soaking duration Setting the delay timer / soaking durationDelay timer Close the door firmly Opening and closing the doorLoading the washing See Programme Tables for maximum loadsPush the detergent dispenser drawer fully If using liquid detergent / tabletsAdd detergent / conditioner Detergents and conditionersPressed, the door is not properly closed If the delay timer has been setStarting the washing programme Change the washing programme Washing Programme ProgressChanging the Spin Speed Wash Washing cycle is complete/Removing the washingWashing Programme tablesSeparate spin Separate conditioning/starchingSeparate rinse Maintenance and Cleaning Main door Maintenance WashTo run a maintenance wash Washing Machine DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Trouble ShootingWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If there are white residues on the washing If the washing results are not satisfactoryIf there are still grey stains on the washing If after the last rinse foam is still visibleHave a flat container on hand to catch the water Carrying out an emergency emptyingAdditional Rinse RINSE+ When the water is completely drainedSetting the additional rinse function Cancelling the additional rinse functionStarted Child Safety FeatureCancelling the child safety feature Washing programme can beDimensions in mm Technical dataDimensions Installation Safety Precautions Remove transport packaging Installation of the applianceTransporting the appliance Cover the hole with the cap C Are supplied with itInstallation on a Suspended Floor Installation-Site preparationLevelling the appliance Measures not be observed Electrical ConnectionUser Permanent ConnectionTerference Water pressure Water connectionInlet Hose Connection Water Drainage Pump head of greater than 1m Measurements in mm Fitting under kitchen worktopsRecess size requirements Great Britain Warranty conditionsIndex Customer Care 0870 5 929AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG