Electrolux 74689 Fitting under kitchen worktops, Recess size requirements, Measurements in mm

Page 52

Installation and connection instructions

Fitting under kitchen worktops

Important: The water supply tap and power outlet must remain acces- sible after the appliance is installed.

Permanent connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the cur- rent electrical regulations.

The switch must not break the yellow and green earth cable at any point.

This operation should only be performed by a qualified electrician.

Recess size requirements

(Measurements in mm)

52

Image 52

Contents ÖKO-LAVAMAT 74689 update Dear Customer Pages of this instruction bookFuture owners ApplianceContents Installation and connection instructions Page Prior to initial start-up SafetyIntended Use Child Safety General SafetyWhen disposing of the washing machine DisposalEnvironmental tips PackagingFront view Description of the ApplianceDetergent dispenser drawer Control panel Programme selectorMain washing cycle Cottons / Linen at 30 C to 95 C Be combined with Quick WashWool P hand wash Programme option buttons What does Update mean? Consumption dataPreparing a Wash Load Before the first washSorting and preparing a wash load Washing Types and Care Symbols Water softening Quantities of detergent and conditioners?Water hardness details Running a washing cycle When the washing programme has endedBrief instructions Setting the Washing Programme Possible programme options to suit the type of washingChanging the spin speed Changing the spin speed/Selecting the rinse hold functionSelecting the rinse hold function Delay timer Setting the delay timer / soaking durationSoaking duration Opening and closing the door Loading the washingSee Programme Tables for maximum loads Close the door firmlyIf using liquid detergent / tablets Add detergent / conditionerDetergents and conditioners Push the detergent dispenser drawer fullyStarting the washing programme If the delay timer has been setPressed, the door is not properly closed Washing Programme Progress Change the washing programmeChanging the Spin Speed Washing cycle is complete/Removing the washing WashProgramme tables WashingSeparate rinse Separate conditioning/starchingSeparate spin Maintenance and Cleaning Maintenance Wash To run a maintenance washWashing Machine Drum Main doorCleaning the drain pump Before cleaning the drain pumpTrouble Shooting What to do ifWater tap is closed Open the water tap No water flows Inlet hose is leaking Connection Lights up green If the washing results are not satisfactory If there are still grey stains on the washingIf after the last rinse foam is still visible If there are white residues on the washingCarrying out an emergency emptying Have a flat container on hand to catch the waterWhen the water is completely drained Setting the additional rinse functionCancelling the additional rinse function Additional Rinse RINSE+Child Safety Feature Cancelling the child safety featureWashing programme can be StartedDimensions Technical dataDimensions in mm Installation Safety Precautions Transporting the appliance Installation of the applianceRemove transport packaging Are supplied with it Cover the hole with the cap CInstallation-Site preparation Installation on a Suspended FloorLevelling the appliance Electrical Connection Measures not be observedTerference Permanent ConnectionUser Water connection Water pressureInlet Hose Connection Water Drainage Pump head of greater than 1m Recess size requirements Fitting under kitchen worktopsMeasurements in mm Warranty conditions Great BritainIndex 0870 5 929 Customer CareAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG