•Cotton, linen:
500/700/900 max 1000 r.p.m. (EW 1077 F)
max 1200 r.p.m. (EW 1277 F)
max 1400 r.p.m. (EW 1477 F)
max 1600 r.p.m. (EW 1677 F)
•Synthetics, wool: 500/700 max 900 r.p.m.
•Delicates:
500 max 700 r.p.m.
No spin 
By selecting this option the spinning phases are suppressed.
This function is not available for cotton and linen.
To be selected for extremely delicate items.
7 Anti-crease button 
When this button is pressed, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light of
the START/PAUSE 
button flashes and the phase
light 
is alight to indicate that the water must be emptied out.
To empty out water there are 3 possibilities:
•Select programme “D” (draining):
The water is emptied out without spinning.
Attention! Before selecting programme “D” the selector dial has to be positioned on O (cancelling).
•Depress START/PAUSE button 
: after emptying, the machine performs the spin cycle corresponding to the type of fabric previously selected.
•Select the spin speed by means of the relevant button and then depress the START/PAUSE button.
8 Quick wash button 
By pressing this button the washing time is reduced as follows:
•52 minutes for cotton 95°C
•63 minutes for cotton 60°C
•24 minutes for synthetics
•8 minutes for delicates
This option is not available with the wool programme and the Energy saving programme.
To be used for lightly soiled laundry.
9 Extra rinse button 
Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3.
This option is recommended for people who are allergic to detergents and in areas where the water is very soft.
10 “Bio” button
This function can be selected for cotton and synthetics with a washing temperature of 40 or more degrees.
The machine will maintain a temperature of 40° for about 10 minutes to enable the enzymes contained in the detergent to eliminate the dirt.
To be used for laundry with “stubborn” stains.
11 DELAY START button 
The wash programme can be delayed from 1 hour up to a maximum of 24 hours by means of this button.
Selecting the delayed start
•Switch the machine on by depressing the ON/OFF button 
.
•Select the programme and the required options.
•Select the delay start.
•Depress START/PAUSE button 
: the machine starts its hourly countdown.
The programme will start after the selected delay has expired.
Altering the delayed start
•Depress START/PAUSE button 
.
•Depress DELAY START button until the required time is displayed.
If you wish to cancel the delay, depress the button 
only once: the symbol 0h is displayed.
•Depress START/PAUSE button again.
ENGLISH
11