Programme information

starts to flash. Depress the same button again to restart the programme.

Cancelling a programme

Turn the selector dial to O to cancel a programme which is running: three flashing dashes appear on the display. Now you can select a new programme.

Opening the door after the programme has started

First set the machine to PAUSE by pressing the START/PAUSE button.

The door can be opened when the door locked light has gone out.

If the door does not open, this means that the machine is already heating, that the water level is above the bottom edge of the door or that the drum is turning.

If you cannot open the door but you need to open it you have to switch the machine off by depressing the ON/OFF button . After about 3 minutes the door can be opened (pay attention to the water level and temperature!). To restart the programme depress ON/OFF button again after closing the door.

Wool

Washing programme for machine washable wool as well as for hand washable woollens and delicate fabrics with the “hand washing” care symbol.

A = Soak

Select this programme for heavily soiled laundry. Pour the detergent into the compartment . This programme is not suitable for wool.

The machine performs a soak at 30°C and stops with the water in the drum. The water can be emptied out in 2 ways:

•Draining only by depressing the START/PAUSE button.

•Draining and spin: turn the programme selector dial to O, select programme “F” (spin), reduce eventually the spin speed by means of button and depress START/PAUSE button.

Important!

•If the water is not emptied out within 18 hours, the machine empties automatically.

•At the end of the soak (after having emptied out the water) you can select the washing programme. Turn first the programme selector dial to O, then select the programme and depress the START/PAUSE button.

B = Rinses

With this programme it is possible to rinse and spin garments which have been washed by hand.

The machine performs 3 rinses, followed by a final spin at the max. speed.

The spin speed can be reduced by depressing button .

C = Softeners

Hand washed garments can be softened with this programme.

The machine performs 1 rinse, followed by a final spin at the max. speed, which can be reduced by depressing button .

D = Drain

For emptying out the water of the last rinse in

programmes with the Anti-crease option. Turn first the programme selector dial to O, then select programme “D” and depress the START/PAUSE button.

F = Spin

Separate spin at the maximum speed for hand washed garments. You can reduce the speed by

means of button to adapt it to the fabrics to be spun.

G = Short programme

This is a complete programme that can be combined with the following options: spin speed reduction, no spin, anti-crease and delayed start.

To be used for laundry which is lightly soiled or which needs freshening up.

Max load 2.5 kg.

Washing temperature 30°C Programme duration 30 minutes Final spin speed 700 r.p.m.

O = Cancelling

To reset a programme turn the selector dial to O. Now can a new programme be selected.