12 DISPLAY
The display shows the following information:
Cancelling - Duration of the programme - Delayed start - Incorrect option selection - Alarm code - End of programme.
Cancelling
If a programme has been cancelled - programme selector dial on position O - three flashing dashes appear on the display.
Now you can select a new programme.
Duration of the selected
programme
After selecting a programme, the duration is displayed in hours and minutes ( for example 2.05).
2.05
The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric.
After the programme has started, the time remaining is updated every minute.
Delayed start
The selected delay (24 hours max) set by means of the relevant button appears on the display for 3 seconds, then the duration of the previously selected programme is displayed.
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed for 2 seconds.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example E20 (see paragraph “Something not working”).
E20
End of programme
When the programme has finished a flashing zero is displayed.
12