Electrolux LAVAMAT 62810 manual Switching on the appliance/selecting a programme

Page 13

Switching on the appliance/selecting a programme

Set the programme and tempera- ture using the programme selector.

3 The appliance is switched on by se- lecting a programme.

– The programme progress display shows the programme steps that the selected programme will car- ry out.

–The estimated programme dura- tion (in minutes) appears in the multi-display.

Changing the spin speed/selecting rinse hold

The washing machine suggests the maximum permitted spin speed suitable for the selected pro- gramme. You can reduce this spin speed:

To do this, press the Spin/RINSE HOLD button repeatedly until the required indicator is illuminated.

3 The spin speed for the final spin can be changed even during the pro- gramme. To do this:

1.Press the START/PAUSE button.

2.Change the spin speed.

3.Press the START/PAUSE button again.

RINSE HOLD

With RINSE HOLD the washing is left to soak in the final rinse water. No final spin takes place, only the intermediate spin. The intermediate spin depends on the programme and cannot be changed.

13

Image 13

Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsPrior to using the appliance for the first time SafetyChild safety Follow the Installation and connection instructionsResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Preparing and sorting washing Before the first washPreparing washing Sorting washingOpening the door/loading washing Running a wash cycleAdding detergent /conditioner Open the door pull the handle on the doorWashing powder/tablets for the main wash cycle If you are using liquid detergentChanging the spin speed/selecting rinse hold Switching on the appliance/selecting a programmeShortened wash programme for lightly soiled items Selecting additional programmesStarting a programme Setting the delay timerProgramme sequence End of the wash cycle/removing the washing Interrupting a programme/adding washingInterrupting a programme Adding washingDeactivating the child safety device Child safety deviceCleaning procedure Cleaning and maintenanceDetergent dispenser drawer Washing drumClean the glass in the door and the rubber collar regularly Remedying small faults yourselfWhat to do if Door and rubber collarE10 appears Tap is shut off Turn on the tap END indicator is There are grey stains on the washing If the wash result is not satisfactoryFoam can still be seen following the final rinse Carrying out an emergency drain When the water has all drained awayThere are white residues on the washing Drain pump Packaging material DisposalOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationWhen using a sack trolley to transport the washing machine Installing the applianceTransporting the appliance Removing the transit packagingWhere to install If the appliance is to stand on a base Making the appliance levelElectrical Connection Brown Live Wire coloured green and yellowPermanent Connection Permitted water pressure Connecting the appliance to the water supply35m long pressure hose is supplied with the appliance Water inletWater Drainage From your Service Force CentreFor drainage into an outlet Pumping heights of over 1 metre Great Britain Warranty conditionsAutres agences étrangères assurant le service après-vente Further after-sales service agencies overseasWeitere Kundendienststellen im Ausland Otros puntos de Postventa en el extranjeroCustomer Service Centres Hungary Customer Care 0870 5 929For general enquiries concerning Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG