Electrolux LAVAMAT 62810 manual Setting the delay timer, Starting a programme, Programme sequence

Page 15

Setting the delay timer

3 Using the DELAY TIMER button you can delay the start of a programme by 30 minutes (30') to a maximum of 23 hours (23h).

1.Select the programme.

2.Press the DELAY TIMER button repeatedly until the desired start delay is shown in the multi-display, e.g. 12h to delay the start of the pro- gramme by 12 hours. The DELAY TIMER indicator will illuminate.

3 If the display is showing 23h and you press the button again, the time delay will be cancelled. 0’ will appear followed by the length of the wash programme that has been set.

3.To activate the delay timer, press the START/PAUSE button. The time re-

maining to the start of the programme will be continuously shown (e.g. 12h, 11h, 10h,... 30' etc.).

Starting a programme

1.Check that the tap is turned on.

2.Select a programme.

3.Press the START/PAUSE button. The programme is started, or will start after the delay timer has counted down.

3 If after pressing the START/PAUSE button E40 flashes in the multi-dis- play, the END indicator flashes 4 times and at the same time an acous- tic signal sounds 4 times, the door has not been correctly shut. Push the door firmly closed and press the START/PAUSE button again.

Programme sequence

The programme progress display shows the programme step that is currently being carried out.

The multi-display shows the estimated time remaining (in minutes) until the end of the programme.

3 The time remaining can increase or stay the same for a while during the course of the cycle as the programme adjusts itself to various condi- tions (e.g. type of washing and quantity, out of balance spin detection, special rinse cycle, etc.).

15

Image 15
Contents Lavamat Dear Customer Following symbols are used in the textContents Safety information concerning installation Installation and connection instructionsFollow the Installation and connection instructions SafetyPrior to using the appliance for the first time Child safetyResulting overheating may constitute a fire hazard General safetyControl panel Description of the applianceRefresh Programme overviewApplication/Features Care Symbols1 Sorting washing Before the first washPreparing and sorting washing Preparing washingOpen the door pull the handle on the door Running a wash cycleOpening the door/loading washing Adding detergent /conditionerWashing powder/tablets for the main wash cycle If you are using liquid detergentChanging the spin speed/selecting rinse hold Switching on the appliance/selecting a programmeShortened wash programme for lightly soiled items Selecting additional programmesSetting the delay timer Starting a programmeProgramme sequence Adding washing Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Interrupting a programmeDeactivating the child safety device Child safety deviceWashing drum Cleaning and maintenanceCleaning procedure Detergent dispenser drawerDoor and rubber collar Remedying small faults yourselfClean the glass in the door and the rubber collar regularly What to do ifE10 appears Tap is shut off Turn on the tap END indicator is If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse When the water has all drained away Carrying out an emergency drainThere are white residues on the washing Drain pump Disposal Packaging materialOld appliance Consumption values Technical dataThis washing machine cannot be built-in Safety information concerning installationRemoving the transit packaging Installing the applianceWhen using a sack trolley to transport the washing machine Transporting the applianceWhere to install If the appliance is to stand on a base Making the appliance levelBrown Live Wire coloured green and yellow Electrical ConnectionPermanent Connection Permitted water pressure Connecting the appliance to the water supply35m long pressure hose is supplied with the appliance Water inletFrom your Service Force Centre Water DrainageFor drainage into an outlet Pumping heights of over 1 metre Great Britain Warranty conditionsOtros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im AuslandCustomer Service Centres Hungary Major Appliances 0870 5 929Customer Care For general enquiries concerningAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG