Electrolux LAVAMAT 62810 manual Electrical Connection, Permanent Connection

Page 30

Electrical Connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

1 WARNING – THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate.

The appliance is supplied with a 13 amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13 amp ASTA ap- proved (BS 1362) fuse must be used.

Should the plug need to be replaced

for any reason, proceed as described below. The wires in the mains lead are

coloured in accordance with the following code:

Green and Yellow:

Earth

Blue:

Neutral

Brown:

Live

The wire coloured green and yellow

must be connected to the terminal marked with the letter “E“ or by the

earth symbol E or coloured green and yellow.

The wire coloured blue must be connected to the terminal “N“ or coloured black.

The wire coloured brown must be connected to the terminal marked “L“ or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

30

Image 30
Contents Lavamat Following symbols are used in the text Dear CustomerContents Installation and connection instructions Safety information concerning installationChild safety SafetyPrior to using the appliance for the first time Follow the Installation and connection instructionsGeneral safety Resulting overheating may constitute a fire hazardDescription of the appliance Control panelProgramme overview RefreshApplication/Features Care Symbols1 Preparing washing Before the first washPreparing and sorting washing Sorting washingAdding detergent /conditioner Running a wash cycleOpening the door/loading washing Open the door pull the handle on the doorIf you are using liquid detergent Washing powder/tablets for the main wash cycleSwitching on the appliance/selecting a programme Changing the spin speed/selecting rinse holdSelecting additional programmes Shortened wash programme for lightly soiled itemsSetting the delay timer Starting a programmeProgramme sequence Interrupting a programme Interrupting a programme/adding washingEnd of the wash cycle/removing the washing Adding washingChild safety device Deactivating the child safety deviceDetergent dispenser drawer Cleaning and maintenanceCleaning procedure Washing drumWhat to do if Remedying small faults yourselfClean the glass in the door and the rubber collar regularly Door and rubber collarE10 appears Tap is shut off Turn on the tap END indicator is If the wash result is not satisfactory There are grey stains on the washingFoam can still be seen following the final rinse When the water has all drained away Carrying out an emergency drainThere are white residues on the washing Drain pump Disposal Packaging materialOld appliance Technical data Consumption valuesSafety information concerning installation This washing machine cannot be built-inTransporting the appliance Installing the applianceWhen using a sack trolley to transport the washing machine Removing the transit packagingWhere to install Making the appliance level If the appliance is to stand on a baseBrown Live Wire coloured green and yellow Electrical ConnectionPermanent Connection Connecting the appliance to the water supply Permitted water pressureWater inlet 35m long pressure hose is supplied with the applianceFrom your Service Force Centre Water DrainageFor drainage into an outlet Pumping heights of over 1 metre Warranty conditions Great BritainWeitere Kundendienststellen im Ausland Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Otros puntos de Postventa en el extranjeroCustomer Service Centres Hungary For general enquiries concerning 0870 5 929Customer Care Major AppliancesAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG