Activating/deactivating RINSE+
If RINSE+ is activated, two additional rinse cycles take place with the programmes COTTONS/LINEN,
Activating RINSE+:
1.Turn the programme selector to COTTONS/LINEN,
2.Simultaneously press and hold the PRE WASH and DELAY TIMER but- tons until RINSE and RINSE+ are illuminated on the programme progress display. RINSE+ has now been permanently activated.
Prior to the start of a programme RINSE+ is illuminated in the pro- gramme progress display and while the additional rinse cycles are being performed.
Deactivating RINSE+
1.Turn the programme selector to COTTONS/LINEN,
2.Simultaneously press and hold the PRE WASH and DELAY TIMER but- tons until RINSE+ goes out on the programme progress display. RINSE+ is now permanently deactivated.
Setting the delay timer
The DELAY TIMER button allows you to delay the start of a programme.
1.Select the programme.
2.Press the DELAY TIMER button once if the wash programme is to start in 6 hours. The 6h indicator will illuminate.
Press the DELAY TIMER button twice if the wash programme is to start in 3 hours. The 3h indicator will illuminate.
3 If you press the DELAY TIMER button again, the delay timer will be can- celled. The indicator will go out.
3.To activate the delay timer, press the START/PAUSE button.
Note: If a time delay of 6 hours is selected, the 6h indicator will illumi- nate. After 3 hours the display will switch and 3h will be illuminated. After a total of 6 hours the wash programme will then start.
14